MO1: Absorbers not so good and absorbers to have a closer look
 ===============================================================

b0246_02_m01c01: Problems with lead cleaning,
                 currently in storage box in FIBERTECNIC

b0212_07_m01c02: Thicknesses larger than normal at the obtuse side, 
                 not understood. Sent to CPPM. In principle OK 
                 but have a closer look to it. 

sun12_04_m01c05: Thickness at acute/obtuse smaller/larger than normal. 
                 Large un-glued areas at obtuse. Sent to CPPM. 
                 Reason: front bar the other way around !

b0266_06_m01c06: 3D measurements a bit weird although Thicknesses OK. 
                 Probably a problem in placing the absorber in the 
                 3D measuring jig. Sent to CPPM In principle OK but 
                 have a closer look to it. 

b0XXX_09_m01c09: Vacuum bag fully broken. Very badly cured. Distroyed. 

b0300_02_m01c09: Vacuum bag partialy broken. Sent to CPPM. Measurements 
                 OK. In principle OK but have a closer look to it.