MO2: Absorbers not so good and absorbers to have a closer look
 ===============================================================

 s060_01_m02c02: thicknesses at obtuse as if it had been cured 
                 in mould 03 or 04 instead of 01. In principle OK.
                 At UAM.  

b0160_02_m02c02: 2 half-waves with large "measured" thickness 
                 at acute. Height of folds different than other 
                 absorbers at obtuse. Probably OK but check 
                 before mounitng. At UAM. 

b0282_07_m02c02: Watch the many hits area indicated in QCS. 
                 Measurements OK. In principle OK. At UAM.

b0157_08_m02c02: problems at acute side of front bar. Watch it 
                 carefully before using. Measurements OK. At UAM. 

b0133_06_m02c09: parallel straight lines marked deeply on the 
                 absorber reported on the QCS. Check carefully. 
                 Measurements OK. At UAM.